Size : 4.5*5.5*5.5cm /22.9g
1. Clean the wall surface, tear off the suction cup protective film, do not touch the water before installation.
2. Confirm the position adsorption, press the middle of the suction cup to remove the air.
3. Rotate the lock, please be sure to rotate the innermost right lock.
1. Rotate 60° counterclockwise to unlock
2. Drop water from the small ear of the suction cup and the seam at the wall, then slowly remove it.
3. Do not use sharp.
4. Do not damage the surface of the suction cup when disassembling.
1. Clean the surface of the suction cup with water.
2. Dry it with a hot air blower 15cm from the suction cup, use it after cooling, or dry it naturally after washing.
1. Keep away from fire.
2. Regular vacuum reset, make the suction cup stronger, do not need to remove the suction cup, just unlock the suction cup to the open direction, press the middle part of the suction cup to remove the air, then lock in the close direction.
3. Suction cups are not suitable for wallpaper, painted walls, latex paint, unpainted logs, and surfaces with deep grain lines.